Python 应用程序编程接口为 C/C++ 程序员提供各种级别的 Python 解释器访问。 API 同样可用于 C++，但为了简洁，一般称为 Python/C API。使用 Python/C API 有 2 个根本不同原因。第 1 个原因是要编写 扩展模块 为特定目的；这会扩展 Python 解释器的 C 模块。这可能是最常见用法。第 2 个原因是在更大应用程序中将 Python 用作组件；这种技术一般称为 embedding Python 在应用程序。
编写扩展模块是相对好理解的过程，若 "食谱" 方法工作得很好。有一些工具在某种程度上可以自动化过程。尽管人们将 Python 嵌入其它应用程序从早期起就已存在，嵌入 Python 的过程相比编写扩展不太直接。
许多 API 函数很有用，独立于是嵌入还是扩展 Python ；再者，大多数嵌入 Python 的应用程序还需要提供自定义扩展，所以熟悉编写扩展可能是个好主意，在试图将 Python 嵌入到真正的应用程序之前。
若正编写要包括在 CPython 中的 C 代码， must 遵循的指导方针和定义的标准在 PEP 7 。这些指导方针适用于您正贡献的任何版本 Python。您自己的第 3 方扩展模块不必遵循这些约定，除非最终期望将它们贡献给 Python。
使用 Python/C API 所需的所有函数、类型和宏定义，都通过将以下行包括在代码中：
#define PY_SSIZE_T_CLEAN #include <Python.h>
这隐含包括下列标准头： <stdio.h> , <string.h> , <errno.h> , <limits.h> , <assert.h> and <stdlib.h> (若可用)。
<stdio.h>
<string.h>
<errno.h>
<limits.h>
<assert.h>
<stdlib.h>
注意
由于 Python 可能定义一些 (影响某些系统标准头的) 预处理器定义， must 包括 Python.h 在包括任何标准头之前。
Python.h
推荐始终定义 PY_SSIZE_T_CLEAN 先于包括 Python.h 。见 解析自变量和构建值 了解此宏的描述。
PY_SSIZE_T_CLEAN
由 Python.h 定义的所有用户可见名称 (除由包括标准头定义的那些外) 都有一个前缀 Py or _Py 。名称开头采用 _Py 仅供 Python 实现内部使用，而扩展作者不应使用。 Structure 成员名称没有预留前缀。
Py
_Py
用户代码从不应将名称定义成开头采用 Py or _Py 。这让读者感到困惑，并危及用户代码到未来 Python 版本的可移植性，可以定义以这些前缀之一开头的额外名称。
头文件通常采用 Python 所安装的。在 Unix，这此位于目录 prefix/include/pythonversion/ and exec_prefix/include/pythonversion/ ，其中 prefix and exec_prefix 的定义对应 Python 参数 configure 脚本和 version is '%d.%d' % sys.version_info[:2] 。在 Windows，头安装在 prefix/include ，其中 prefix 是安装程序指定的安装目录。
prefix/include/pythonversion/
exec_prefix/include/pythonversion/
prefix
exec_prefix
'%d.%d' % sys.version_info[:2]
prefix/include
要包括头文件，将 2 目录 (若不同) 放在编译器 include 搜索路径下。 not 将父级目录放在搜索路径下，然后使用 #include <pythonX.Y/Python.h> ；这会破坏多平台构建，因为平台独立头位于 prefix 包括的特定平台头来自 exec_prefix .
#include <pythonX.Y/Python.h>
C++ 用户应注意，尽管 API 完全是使用 C 定义的，但需要将头文件入口点正确声明成 extern "C" 。因此，不需要做任何特殊处理就能使用来自 C++ 的 API。
extern "C"
Python 头文件中定义了几个有用宏。许多定义更接近它们的用处 (如 Py_RETURN_NONE )。这里有定义更通用的其它实用程序。这并非完整清单。
Py_RETURN_NONE
Declare an extension module PyInit initialization function. The function return type is PyObject * . The macro declares any special linkage declarations required by the platform, and for C++ declares the function as extern "C" .
PyInit
The initialization function must be named PyInit_name ，其中 name 是模块名称，且应该是唯一非 static item defined in the module file. Example:
PyInit_name
static
static struct PyModuleDef spam_module = { PyModuleDef_HEAD_INIT, .m_name = "spam", ... }; PyMODINIT_FUNC PyInit_spam(void) { return PyModule_Create(&spam_module); }
返回绝对值的 x .
x
Added in version 3.3.
Ask the compiler to always inline a static inline function. The compiler can ignore it and decides to not inline the function.
It can be used to inline performance critical static inline functions when building Python in debug mode with function inlining disabled. For example, MSC disables function inlining when building in debug mode.
Marking blindly a static inline function with Py_ALWAYS_INLINE can result in worse performances (due to increased code size for example). The compiler is usually smarter than the developer for the cost/benefit analysis.
If Python is built in debug mode (if the Py_DEBUG macro is defined), the Py_ALWAYS_INLINE macro does nothing.
Py_DEBUG
Py_ALWAYS_INLINE
It must be specified before the function return type. Usage:
static inline Py_ALWAYS_INLINE int random(void) { return 4; }
Added in version 3.11.
Argument must be a character or an integer in the range [-128, 127] or [0, 255]. This macro returns c cast to an unsigned char .
c
unsigned char
Use this for deprecated declarations. The macro must be placed before the symbol name.
范例：
Py_DEPRECATED(3.8) PyAPI_FUNC(int) Py_OldFunction(void);
3.8 版改变： 添加支持 MSVC。
像 getenv(s) ，但返回 NULL if -E was passed on the command line (see PyConfig.use_environment ).
getenv(s)
NULL
-E
PyConfig.use_environment
Return the maximum value between x and y .
y
Return the size of a structure ( type ) member 以字节为单位。
type
member
Added in version 3.6.
Return the minimum value between x and y .
Disable inlining on a function. For example, it reduces the C stack consumption: useful on LTO+PGO builds which heavily inline code (see bpo-33720 ).
用法：
Py_NO_INLINE static int random(void) { return 4; }
转换 x to a C string. E.g. Py_STRINGIFY(123) 返回 "123" .
Py_STRINGIFY(123)
"123"
Added in version 3.4.
Use this when you have a code path that cannot be reached by design. For example, in the default: clause in a switch statement for which all possible values are covered in case statements. Use this in places where you might be tempted to put an assert(0) or abort() 调用。
default:
switch
case
assert(0)
abort()
In release mode, the macro helps the compiler to optimize the code, and avoids a warning about unreachable code. For example, the macro is implemented with __builtin_unreachable() on GCC in release mode.
__builtin_unreachable()
A use for Py_UNREACHABLE() is following a call a function that never returns but that is not declared _Py_NO_RETURN .
Py_UNREACHABLE()
_Py_NO_RETURN
If a code path is very unlikely code but can be reached under exceptional case, this macro must not be used. For example, under low memory condition or if a system call returns a value out of the expected range. In this case, it’s better to report the error to the caller. If the error cannot be reported to caller, Py_FatalError() 可以使用。
Py_FatalError()
Added in version 3.7.
Use this for unused arguments in a function definition to silence compiler warnings. Example: int func(int a, int Py_UNUSED(b)) { return a; } .
int func(int a, int Py_UNUSED(b)) { return a; }
创建变量采用名称 name that can be used in docstrings. If Python is built without docstrings, the value will be empty.
name
使用 PyDoc_STRVAR for docstrings to support building Python without docstrings, as specified in PEP 7 .
PyDoc_STRVAR
PyDoc_STRVAR(pop_doc, "Remove and return the rightmost element."); static PyMethodDef deque_methods[] = { // ... {"pop", (PyCFunction)deque_pop, METH_NOARGS, pop_doc}, // ... }
Creates a docstring for the given input string or an empty string if docstrings are disabled.
使用 PyDoc_STR in specifying docstrings to support building Python without docstrings, as specified in PEP 7 .
PyDoc_STR
static PyMethodDef pysqlite_row_methods[] = { {"keys", (PyCFunction)pysqlite_row_keys, METH_NOARGS, PyDoc_STR("Returns the keys of the row.")}, {NULL, NULL} };
大多数 Python/C API 函数拥有一个或多个自变量及返回值对于类型 PyObject * . This type is a pointer to an opaque data type representing an arbitrary Python object. Since all Python object types are treated the same way by the Python language in most situations (e.g., assignments, scope rules, and argument passing), it is only fitting that they should be represented by a single C type. Almost all Python objects live on the heap: you never declare an automatic or static variable of type PyObject , only pointer variables of type PyObject * can be declared. The sole exception are the type objects; since these must never be deallocated, they are typically static PyTypeObject 对象。
PyObject
PyTypeObject
All Python objects (even Python integers) have a type 和 引用计数 . An object’s type determines what kind of object it is (e.g., an integer, a list, or a user-defined function; there are many more as explained in 标准类型层次结构 ). For each of the well-known types there is a macro to check whether an object is of that type; for instance, PyList_Check(a) is true if (and only if) the object pointed to by a is a Python list.
PyList_Check(a)
The reference count is important because today’s computers have a finite (and often severely limited) memory size; it counts how many different places there are that have a 强引用 to an object. Such a place could be another object, or a global (or static) C variable, or a local variable in some C function. When the last 强引用 to an object is released (i.e. its reference count becomes zero), the object is deallocated. If it contains references to other objects, those references are released. Those other objects may be deallocated in turn, if there are no more references to them, and so on. (There’s an obvious problem with objects that reference each other here; for now, the solution is “don’t do that.”)
Reference counts are always manipulated explicitly. The normal way is to use the macro Py_INCREF() to take a new reference to an object (i.e. increment its reference count by one), and Py_DECREF() to release that reference (i.e. decrement the reference count by one). The Py_DECREF() macro is considerably more complex than the incref one, since it must check whether the reference count becomes zero and then cause the object’s deallocator to be called. The deallocator is a function pointer contained in the object’s type structure. The type-specific deallocator takes care of releasing references for other objects contained in the object if this is a compound object type, such as a list, as well as performing any additional finalization that’s needed. There’s no chance that the reference count can overflow; at least as many bits are used to hold the reference count as there are distinct memory locations in virtual memory (assuming sizeof(Py_ssize_t) >= sizeof(void*) ). Thus, the reference count increment is a simple operation.
Py_INCREF()
Py_DECREF()
sizeof(Py_ssize_t) >= sizeof(void*)
It is not necessary to hold a 强引用 (i.e. increment the reference count) for every local variable that contains a pointer to an object. In theory, the object’s reference count goes up by one when the variable is made to point to it and it goes down by one when the variable goes out of scope. However, these two cancel each other out, so at the end the reference count hasn’t changed. The only real reason to use the reference count is to prevent the object from being deallocated as long as our variable is pointing to it. If we know that there is at least one other reference to the object that lives at least as long as our variable, there is no need to take a new 强引用 (i.e. increment the reference count) temporarily. An important situation where this arises is in objects that are passed as arguments to C functions in an extension module that are called from Python; the call mechanism guarantees to hold a reference to every argument for the duration of the call.
However, a common pitfall is to extract an object from a list and hold on to it for a while without taking a new reference. Some other operation might conceivably remove the object from the list, releasing that reference, and possibly deallocating it. The real danger is that innocent-looking operations may invoke arbitrary Python code which could do this; there is a code path which allows control to flow back to the user from a Py_DECREF() , so almost any operation is potentially dangerous.
A safe approach is to always use the generic operations (functions whose name begins with PyObject_ , PyNumber_ , PySequence_ or PyMapping_ ). These operations always create a new 强引用 (i.e. increment the reference count) of the object they return. This leaves the caller with the responsibility to call Py_DECREF() when they are done with the result; this soon becomes second nature.
PyObject_
PyNumber_
PySequence_
PyMapping_
The reference count behavior of functions in the Python/C API is best explained in terms of ownership of references . Ownership pertains to references, never to objects (objects are not owned: they are always shared). “Owning a reference” means being responsible for calling Py_DECREF on it when the reference is no longer needed. Ownership can also be transferred, meaning that the code that receives ownership of the reference then becomes responsible for eventually releasing it by calling Py_DECREF() or Py_XDECREF() when it’s no longer needed—or passing on this responsibility (usually to its caller). When a function passes ownership of a reference on to its caller, the caller is said to receive a new reference. When no ownership is transferred, the caller is said to borrow the reference. Nothing needs to be done for a 借位引用 .
Py_XDECREF()
Conversely, when a calling function passes in a reference to an object, there are two possibilities: the function steals a reference to the object, or it does not. Stealing a reference means that when you pass a reference to a function, that function assumes that it now owns that reference, and you are not responsible for it any longer.
Few functions steal references; the two notable exceptions are PyList_SetItem() and PyTuple_SetItem() , which steal a reference to the item (but not to the tuple or list into which the item is put!). These functions were designed to steal a reference because of a common idiom for populating a tuple or list with newly created objects; for example, the code to create the tuple (1, 2, "three") could look like this (forgetting about error handling for the moment; a better way to code this is shown below):
PyList_SetItem()
PyTuple_SetItem()
(1, 2, "three")
PyObject *t; t = PyTuple_New(3); PyTuple_SetItem(t, 0, PyLong_FromLong(1L)); PyTuple_SetItem(t, 1, PyLong_FromLong(2L)); PyTuple_SetItem(t, 2, PyUnicode_FromString("three"));
这里， PyLong_FromLong() returns a new reference which is immediately stolen by PyTuple_SetItem() . When you want to keep using an object although the reference to it will be stolen, use Py_INCREF() to grab another reference before calling the reference-stealing function.
PyLong_FromLong()
Incidentally, PyTuple_SetItem() 是 only way to set tuple items; PySequence_SetItem() and PyObject_SetItem() refuse to do this since tuples are an immutable data type. You should only use PyTuple_SetItem() for tuples that you are creating yourself.
PySequence_SetItem()
PyObject_SetItem()
Equivalent code for populating a list can be written using PyList_New() and PyList_SetItem() .
PyList_New()
However, in practice, you will rarely use these ways of creating and populating a tuple or list. There’s a generic function, Py_BuildValue() , that can create most common objects from C values, directed by a format string . For example, the above two blocks of code could be replaced by the following (which also takes care of the error checking):
Py_BuildValue()
PyObject *tuple, *list; tuple = Py_BuildValue("(iis)", 1, 2, "three"); list = Py_BuildValue("[iis]", 1, 2, "three");
It is much more common to use PyObject_SetItem() and friends with items whose references you are only borrowing, like arguments that were passed in to the function you are writing. In that case, their behaviour regarding references is much saner, since you don’t have to take a new reference just so you can give that reference away (“have it be stolen”). For example, this function sets all items of a list (actually, any mutable sequence) to a given item:
int set_all(PyObject *target, PyObject *item) { Py_ssize_t i, n; n = PyObject_Length(target); if (n < 0) return -1; for (i = 0; i < n; i++) { PyObject *index = PyLong_FromSsize_t(i); if (!index) return -1; if (PyObject_SetItem(target, index, item) < 0) { Py_DECREF(index); return -1; } Py_DECREF(index); } return 0; }
The situation is slightly different for function return values. While passing a reference to most functions does not change your ownership responsibilities for that reference, many functions that return a reference to an object give you ownership of the reference. The reason is simple: in many cases, the returned object is created on the fly, and the reference you get is the only reference to the object. Therefore, the generic functions that return object references, like PyObject_GetItem() and PySequence_GetItem() , always return a new reference (the caller becomes the owner of the reference).
PyObject_GetItem()
PySequence_GetItem()
It is important to realize that whether you own a reference returned by a function depends on which function you call only — the plumage (the type of the object passed as an argument to the function) doesn’t enter into it! Thus, if you extract an item from a list using PyList_GetItem() , you don’t own the reference — but if you obtain the same item from the same list using PySequence_GetItem() (which happens to take exactly the same arguments), you do own a reference to the returned object.
PyList_GetItem()
Here is an example of how you could write a function that computes the sum of the items in a list of integers; once using PyList_GetItem() , and once using PySequence_GetItem() .
long sum_list(PyObject *list) { Py_ssize_t i, n; long total = 0, value; PyObject *item; n = PyList_Size(list); if (n < 0) return -1; /* Not a list */ for (i = 0; i < n; i++) { item = PyList_GetItem(list, i); /* Can't fail */ if (!PyLong_Check(item)) continue; /* Skip non-integers */ value = PyLong_AsLong(item); if (value == -1 && PyErr_Occurred()) /* Integer too big to fit in a C long, bail out */ return -1; total += value; } return total; }
long sum_sequence(PyObject *sequence) { Py_ssize_t i, n; long total = 0, value; PyObject *item; n = PySequence_Length(sequence); if (n < 0) return -1; /* Has no length */ for (i = 0; i < n; i++) { item = PySequence_GetItem(sequence, i); if (item == NULL) return -1; /* Not a sequence, or other failure */ if (PyLong_Check(item)) { value = PyLong_AsLong(item); Py_DECREF(item); if (value == -1 && PyErr_Occurred()) /* Integer too big to fit in a C long, bail out */ return -1; total += value; } else { Py_DECREF(item); /* Discard reference ownership */ } } return total; }
There are few other data types that play a significant role in the Python/C API; most are simple C types such as int , long , double and char * . A few structure types are used to describe static tables used to list the functions exported by a module or the data attributes of a new object type, and another is used to describe the value of a complex number. These will be discussed together with the functions that use them.
A signed integral type such that sizeof(Py_ssize_t) == sizeof(size_t) . C99 doesn’t define such a thing directly (size_t is an unsigned integral type). See PEP 353 了解细节。 PY_SSIZE_T_MAX is the largest positive value of type Py_ssize_t .
sizeof(Py_ssize_t) == sizeof(size_t)
PY_SSIZE_T_MAX
Py_ssize_t
The Python programmer only needs to deal with exceptions if specific error handling is required; unhandled exceptions are automatically propagated to the caller, then to the caller’s caller, and so on, until they reach the top-level interpreter, where they are reported to the user accompanied by a stack traceback.
For C programmers, however, error checking always has to be explicit. All functions in the Python/C API can raise exceptions, unless an explicit claim is made otherwise in a function’s documentation. In general, when a function encounters an error, it sets an exception, discards any object references that it owns, and returns an error indicator. If not documented otherwise, this indicator is either NULL or -1 , depending on the function’s return type. A few functions return a Boolean true/false result, with false indicating an error. Very few functions return no explicit error indicator or have an ambiguous return value, and require explicit testing for errors with PyErr_Occurred() . These exceptions are always explicitly documented.
-1
PyErr_Occurred()
Exception state is maintained in per-thread storage (this is equivalent to using global storage in an unthreaded application). A thread can be in one of two states: an exception has occurred, or not. The function PyErr_Occurred() can be used to check for this: it returns a borrowed reference to the exception type object when an exception has occurred, and NULL otherwise. There are a number of functions to set the exception state: PyErr_SetString() is the most common (though not the most general) function to set the exception state, and PyErr_Clear() clears the exception state.
PyErr_SetString()
PyErr_Clear()
The full exception state consists of three objects (all of which can be NULL ): the exception type, the corresponding exception value, and the traceback. These have the same meanings as the Python result of sys.exc_info() ; however, they are not the same: the Python objects represent the last exception being handled by a Python try … except statement, while the C level exception state only exists while an exception is being passed on between C functions until it reaches the Python bytecode interpreter’s main loop, which takes care of transferring it to sys.exc_info() and friends.
sys.exc_info()
try
except
Note that starting with Python 1.5, the preferred, thread-safe way to access the exception state from Python code is to call the function sys.exc_info() , which returns the per-thread exception state for Python code. Also, the semantics of both ways to access the exception state have changed so that a function which catches an exception will save and restore its thread’s exception state so as to preserve the exception state of its caller. This prevents common bugs in exception handling code caused by an innocent-looking function overwriting the exception being handled; it also reduces the often unwanted lifetime extension for objects that are referenced by the stack frames in the traceback.
As a general principle, a function that calls another function to perform some task should check whether the called function raised an exception, and if so, pass the exception state on to its caller. It should discard any object references that it owns, and return an error indicator, but it should not set another exception — that would overwrite the exception that was just raised, and lose important information about the exact cause of the error.
A simple example of detecting exceptions and passing them on is shown in the sum_sequence() example above. It so happens that this example doesn’t need to clean up any owned references when it detects an error. The following example function shows some error cleanup. First, to remind you why you like Python, we show the equivalent Python code:
sum_sequence()
def incr_item(dict, key): try: item = dict[key] except KeyError: item = 0 dict[key] = item + 1
Here is the corresponding C code, in all its glory:
int incr_item(PyObject *dict, PyObject *key) { /* Objects all initialized to NULL for Py_XDECREF */ PyObject *item = NULL, *const_one = NULL, *incremented_item = NULL; int rv = -1; /* Return value initialized to -1 (failure) */ item = PyObject_GetItem(dict, key); if (item == NULL) { /* Handle KeyError only: */ if (!PyErr_ExceptionMatches(PyExc_KeyError)) goto error; /* Clear the error and use zero: */ PyErr_Clear(); item = PyLong_FromLong(0L); if (item == NULL) goto error; } const_one = PyLong_FromLong(1L); if (const_one == NULL) goto error; incremented_item = PyNumber_Add(item, const_one); if (incremented_item == NULL) goto error; if (PyObject_SetItem(dict, key, incremented_item) < 0) goto error; rv = 0; /* Success */ /* Continue with cleanup code */ error: /* Cleanup code, shared by success and failure path */ /* Use Py_XDECREF() to ignore NULL references */ Py_XDECREF(item); Py_XDECREF(const_one); Py_XDECREF(incremented_item); return rv; /* -1 for error, 0 for success */ }
This example represents an endorsed use of the goto statement in C! It illustrates the use of PyErr_ExceptionMatches() and PyErr_Clear() to handle specific exceptions, and the use of Py_XDECREF() to dispose of owned references that may be NULL (note the 'X' in the name; Py_DECREF() would crash when confronted with a NULL reference). It is important that the variables used to hold owned references are initialized to NULL for this to work; likewise, the proposed return value is initialized to -1 (failure) and only set to success after the final call made is successful.
goto
PyErr_ExceptionMatches()
'X'
The one important task that only embedders (as opposed to extension writers) of the Python interpreter have to worry about is the initialization, and possibly the finalization, of the Python interpreter. Most functionality of the interpreter can only be used after the interpreter has been initialized.
The basic initialization function is Py_Initialize() . This initializes the table of loaded modules, and creates the fundamental modules builtins , __main__ ，和 sys 。它还初始化模块搜索路径 ( sys.path ).
Py_Initialize()
builtins
__main__
sys
sys.path
Py_Initialize() does not set the “script argument list” ( sys.argv ). If this variable is needed by Python code that will be executed later, setting PyConfig.argv and PyConfig.parse_argv must be set: see Python 初始化配置 .
sys.argv
PyConfig.argv
PyConfig.parse_argv
On most systems (in particular, on Unix and Windows, although the details are slightly different), Py_Initialize() calculates the module search path based upon its best guess for the location of the standard Python interpreter executable, assuming that the Python library is found in a fixed location relative to the Python interpreter executable. In particular, it looks for a directory named lib/pythonX.Y relative to the parent directory where the executable named python is found on the shell command search path (the environment variable PATH ).
lib/pythonX.Y
python
PATH
For instance, if the Python executable is found in /usr/local/bin/python , it will assume that the libraries are in /usr/local/lib/pythonX.Y . (In fact, this particular path is also the “fallback” location, used when no executable file named python is found along PATH .) The user can override this behavior by setting the environment variable PYTHONHOME , or insert additional directories in front of the standard path by setting PYTHONPATH .
/usr/local/bin/python
/usr/local/lib/pythonX.Y
PYTHONHOME
PYTHONPATH
The embedding application can steer the search by calling Py_SetProgramName(file) before 调用 Py_Initialize() 。注意， PYTHONHOME still overrides this and PYTHONPATH is still inserted in front of the standard path. An application that requires total control has to provide its own implementation of Py_GetPath() , Py_GetPrefix() , Py_GetExecPrefix() ，和 Py_GetProgramFullPath() (all defined in Modules/getpath.c ).
Py_SetProgramName(file)
Py_GetPath()
Py_GetPrefix()
Py_GetExecPrefix()
Py_GetProgramFullPath()
Modules/getpath.c
Sometimes, it is desirable to “uninitialize” Python. For instance, the application may want to start over (make another call to Py_Initialize() ) or the application is simply done with its use of Python and wants to free memory allocated by Python. This can be accomplished by calling Py_FinalizeEx() . The function Py_IsInitialized() returns true if Python is currently in the initialized state. More information about these functions is given in a later chapter. Notice that Py_FinalizeEx() does not free all memory allocated by the Python interpreter, e.g. memory allocated by extension modules currently cannot be released.
Py_FinalizeEx()
Py_IsInitialized()
Python can be built with several macros to enable extra checks of the interpreter and extension modules. These checks tend to add a large amount of overhead to the runtime so they are not enabled by default.
A full list of the various types of debugging builds is in the file Misc/SpecialBuilds.txt in the Python source distribution. Builds are available that support tracing of reference counts, debugging the memory allocator, or low-level profiling of the main interpreter loop. Only the most frequently used builds will be described in the remainder of this section.
Misc/SpecialBuilds.txt
Compiling the interpreter with the Py_DEBUG macro defined produces what is generally meant by a debug build of Python . Py_DEBUG is enabled in the Unix build by adding --with-pydebug 到 ./configure command. It is also implied by the presence of the not-Python-specific _DEBUG macro. When Py_DEBUG is enabled in the Unix build, compiler optimization is disabled.
--with-pydebug
./configure
_DEBUG
In addition to the reference count debugging described below, extra checks are performed, see Python Debug Build .
定义 Py_TRACE_REFS enables reference tracing (see the configure --with-trace-refs option ). When defined, a circular doubly linked list of active objects is maintained by adding two extra fields to every PyObject . Total allocations are tracked as well. Upon exit, all existing references are printed. (In interactive mode this happens after every statement run by the interpreter.)
Py_TRACE_REFS
configure --with-trace-refs option
请参考 Misc/SpecialBuilds.txt 在 Python 源代码分发以获取更多详细信息。
Python/C API 参考手册
C API 稳定性
键入搜索术语或模块、类、函数名称。