pdb
就业培训 下载中心 Wiki 联络 登录 注册 首页 Python 3.12.4 索引 模块 下一 上一 Python 标准库 调试和剖分析 pdb — Python 调试器 pdb — Python 调试器 ¶ 源代码： Lib/pdb.py 模块 pdb 为 Python 程序定义交互源代码调试器。它支持在源代码行级别设置 (条件) 断点和单步执行、审查堆栈帧、列出源代码、及在任何堆栈帧上下文中评估任意 Python 代码。它支持事后调试，且还可以在程序控制下被调用。 调试器可扩展 – 实际上，它被定义成类 Pdb 。这目前未文档化，但通过阅读源代码很容易理解。扩展接口使用模块 bdb and cmd . 另请参阅 模块 faulthandler Used to dump Python tracebacks explicitly, on a fault, after a timeout, or on a user signal. 模块 traceback Standard interface to extract, format and print stack traces of Python programs. The typical usage to break into the debugger is to insert: import pdb; pdb.set_trace() 或： breakpoint() at the location you want to break into the debugger, and then run the program. You can then step through the code following this statement, and continue running without the debugger using the continue 命令。 3.7 版改变： 内置 breakpoint() , when called with defaults, can be used instead of import pdb; pdb.set_trace() . def double(x): breakpoint() return x * 2 val = 3 print(f"{val} * 2 is {double(val)}") 调试器提示为 (Pdb) , which is the indicator that you are in debug mode: > ...(3)double() -> return x * 2 (Pdb) p x 3 (Pdb) continue 3 * 2 is 6 3.3 版改变： Tab 补全凭借 readline 模块可用于命令和命令自变量，如：提供当前全局和局部名称作为自变量为 p 命令。 You can also invoke pdb from the command line to debug other scripts. For example: python -m pdb myscript.py When invoked as a module, pdb will automatically enter post-mortem debugging if the program being debugged exits abnormally. After post-mortem debugging (or after normal exit of the program), pdb will restart the program. Automatic restarting preserves pdb’s state (such as breakpoints) and in most cases is more useful than quitting the debugger upon program’s exit. 3.2 版改变： 添加 -c option to execute commands as if given in a .pdbrc 文件；见 调试器命令 . 3.7 版改变： 添加 -m option to execute modules similar to the way python -m does. As with a script, the debugger will pause execution just before the first line of the module. Typical usage to execute a statement under control of the debugger is: >>> import pdb >>> def f(x): ... print(1 / x) >>> pdb.run("f(2)") > <string>(1)<module>() (Pdb) continue 0.5 >>> 审查崩溃程序的典型用法： >>> import pdb >>> def f(x): ... print(1 / x) ... >>> f(0) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "<stdin>", line 2, in f ZeroDivisionError: division by zero >>> pdb.pm() > <stdin>(2)f() (Pdb) p x 0 (Pdb) The module defines the following functions; each enters the debugger in a slightly different way: pdb. run ( 语句 , globals = None , locals = None ) ¶ 执行 语句 (given as a string or a code object) under debugger control. The debugger prompt appears before any code is executed; you can set breakpoints and type continue , or you can step through the statement using step or next (all these commands are explained below). The optional globals and locals arguments specify the environment in which the code is executed; by default the dictionary of the module __main__ is used. (See the explanation of the built-in exec() or eval() functions.) pdb. runeval ( 表达式 , globals = None , locals = None ) ¶ 评估 表达式 (given as a string or a code object) under debugger control. When runeval() returns, it returns the value of the 表达式 . Otherwise this function is similar to run() . pdb. runcall ( function , * args , ** kwds ) ¶ 调用 function (a function or method object, not a string) with the given arguments. When runcall() returns, it returns whatever the function call returned. The debugger prompt appears as soon as the function is entered. pdb. set_trace ( * , header = None ) ¶ Enter the debugger at the calling stack frame. This is useful to hard-code a breakpoint at a given point in a program, even if the code is not otherwise being debugged (e.g. when an assertion fails). If given, header is printed to the console just before debugging begins. 3.7 版改变： 仅关键词自变量 header . pdb. post_mortem ( traceback = None ) ¶ Enter post-mortem debugging of the given traceback 对象。若无 traceback is given, it uses the one of the exception that is currently being handled (an exception must be being handled if the default is to be used). pdb. pm ( ) ¶ Enter post-mortem debugging of the traceback found in sys.last_traceback . The run* 函数和 set_trace() 是别名对于实例化的 Pdb 类且调用同名方法。若想要访问进一步特征，自己必须这样做： class pdb. Pdb ( completekey = 'tab' , stdin = None , stdout = None , skip = None , nosigint = False , readrc = True ) ¶ Pdb 是调试器类。 The completekey , stdin and stdout 自变量会被传递给底层 cmd.Cmd 类；见这里的描述。 The skip argument, if given, must be an iterable of glob-style module name patterns. The debugger will not step into frames that originate in a module that matches one of these patterns. [ 1 ] By default, Pdb sets a handler for the SIGINT signal (which is sent when the user presses Ctrl - C on the console) when you give a continue command. This allows you to break into the debugger again by pressing Ctrl - C . If you want Pdb not to touch the SIGINT handler, set nosigint to true. The readrc argument defaults to true and controls whether Pdb will load .pdbrc files from the filesystem. 范例调用启用跟踪采用 skip : import pdb; pdb.Pdb(skip=['django.*']).set_trace() 引发 审计事件 pdb.Pdb 不带自变量。 3.1 版改变： 添加 skip 参数。 3.2 版改变： 添加 nosigint parameter. Previously, a SIGINT handler was never set by Pdb. 3.6 版改变： The readrc 自变量。 run ( 语句 , globals = None , locals = None ) ¶ runeval ( 表达式 , globals = None , locals = None ) ¶ runcall ( function , * args , ** kwds ) ¶ set_trace ( ) ¶ See the documentation for the functions explained above. 调试器命令 ¶ The commands recognized by the debugger are listed below. Most commands can be abbreviated to one or two letters as indicated; e.g. h(elp) means that either h or help can be used to enter the help command (but not he or hel , nor H or Help or HELP ). Arguments to commands must be separated by whitespace (spaces or tabs). Optional arguments are enclosed in square brackets ( [] ) in the command syntax; the square brackets must not be typed. Alternatives in the command syntax are separated by a vertical bar ( | ). Entering a blank line repeats the last command entered. Exception: if the last command was a list command, the next 11 lines are listed. Commands that the debugger doesn’t recognize are assumed to be Python statements and are executed in the context of the program being debugged. Python statements can also be prefixed with an exclamation point ( ! ). This is a powerful way to inspect the program being debugged; it is even possible to change a variable or call a function. When an exception occurs in such a statement, the exception name is printed but the debugger’s state is not changed. 调试器支持 aliases . Aliases can have parameters which allows one a certain level of adaptability to the context under examination. Multiple commands may be entered on a single line, separated by ;; 。(单 ; is not used as it is the separator for multiple commands in a line that is passed to the Python parser.) No intelligence is applied to separating the commands; the input is split at the first ;; pair, even if it is in the middle of a quoted string. A workaround for strings with double semicolons is to use implicit string concatenation ';'';' or ";"";" . To set a temporary global variable, use a convenience variable 。 convenience variable is a variable whose name starts with $ 。例如， $foo = 1 sets a global variable $foo which you can use in the debugger session. The convenience variables are cleared when the program resumes execution so it’s less likely to interfere with your program compared to using normal variables like foo = 1 . There are three preset convenience variables : $_frame : the current frame you are debugging $_retval : the return value if the frame is returning $_exception : the exception if the frame is raising an exception Added in version 3.12: 添加 convenience variable 特征。 若文件 .pdbrc exists in the user’s home directory or in the current directory, it is read with 'utf-8' encoding and executed as if it had been typed at the debugger prompt, with the exception that empty lines and lines starting with # are ignored. This is particularly useful for aliases. If both files exist, the one in the home directory is read first and aliases defined there can be overridden by the local file. 3.2 版改变： .pdbrc 现在可以包含继续调试命令，譬如 continue or next . Previously, these commands had no effect. 3.11 版改变： .pdbrc 现在读取是采用 'utf-8' encoding. Previously, it was read with the system locale encoding. h(elp) [command] ¶ Without argument, print the list of available commands. With a 命令 as argument, print help about that command. help pdb displays the full documentation (the docstring of the pdb module). Since the 命令 argument must be an identifier, help exec must be entered to get help on the ! 命令。 w(here) ¶ Print a stack trace, with the most recent frame at the bottom. An arrow ( > ) indicates the current frame, which determines the context of most commands. d(own) [count] ¶ 移动当前帧 count (default one) levels down in the stack trace (to a newer frame). u(p) [count] ¶ 移动当前帧 count (default one) levels up in the stack trace (to an older frame). b(reak) [([filename:]lineno | function) [, condition]] ¶ With a lineno argument, set a break there in the current file. With a function argument, set a break at the first executable statement within that function. The line number may be prefixed with a filename and a colon, to specify a breakpoint in another file (probably one that hasn’t been loaded yet). The file is searched on sys.path . Note that each breakpoint is assigned a number to which all the other breakpoint commands refer. If a second argument is present, it is an expression which must evaluate to true before the breakpoint is honored. Without argument, list all breaks, including for each breakpoint, the number of times that breakpoint has been hit, the current ignore count, and the associated condition if any. tbreak [([filename:]lineno | function) [, condition]] ¶ Temporary breakpoint, which is removed automatically when it is first hit. The arguments are the same as for break . cl(ear) [filename:lineno | bpnumber ...] ¶ With a filename:lineno argument, clear all the breakpoints at this line. With a space separated list of breakpoint numbers, clear those breakpoints. Without argument, clear all breaks (but first ask confirmation). disable bpnumber [bpnumber ...] ¶ Disable the breakpoints given as a space separated list of breakpoint numbers. Disabling a breakpoint means it cannot cause the program to stop execution, but unlike clearing a breakpoint, it remains in the list of breakpoints and can be (re-)enabled. enable bpnumber [bpnumber ...] ¶ Enable the breakpoints specified. ignore bpnumber [count] ¶ Set the ignore count for the given breakpoint number. If count is omitted, the ignore count is set to 0. A breakpoint becomes active when the ignore count is zero. When non-zero, the count is decremented each time the breakpoint is reached and the breakpoint is not disabled and any associated condition evaluates to true. 条件 bpnumber [condition] ¶ Set a new 条件 for the breakpoint, an expression which must evaluate to true before the breakpoint is honored. If 条件 is absent, any existing condition is removed; i.e., the breakpoint is made unconditional. 命令 [bpnumber] ¶ 指定命令列表为断点编号 bpnumber . The commands themselves appear on the following lines. Type a line containing just end to terminate the commands. An example: (Pdb) commands 1 (com) p some_variable (com) end (Pdb) To remove all commands from a breakpoint, type commands and follow it immediately with end ; that is, give no commands. 不带 bpnumber 自变量， commands 指最后断点集。 You can use breakpoint commands to start your program up again. Simply use the continue 命令，或 step , or any other command that resumes execution. Specifying any command resuming execution (currently continue , step , next , return , jump , quit and their abbreviations) terminates the command list (as if that command was immediately followed by end). This is because any time you resume execution (even with a simple next or step), you may encounter another breakpoint—which could have its own command list, leading to ambiguities about which list to execute. 若使用 silent command in the command list, the usual message about stopping at a breakpoint is not printed. This may be desirable for breakpoints that are to print a specific message and then continue. If none of the other commands print anything, you see no sign that the breakpoint was reached. s(tep) ¶ Execute the current line, stop at the first possible occasion (either in a function that is called or on the next line in the current function). n(ext) ¶ Continue execution until the next line in the current function is reached or it returns. (The difference between next and step is that step stops inside a called function, while next executes called functions at (nearly) full speed, only stopping at the next line in the current function.) unt(il) [lineno] ¶ Without argument, continue execution until the line with a number greater than the current one is reached. 采用 lineno , continue execution until a line with a number greater or equal to lineno is reached. In both cases, also stop when the current frame returns. 3.2 版改变： 允许给出明确行号。 r(eturn) ¶ 继续执行，直到当前函数返回为止。 c(ont(inue)) ¶ Continue execution, only stop when a breakpoint is encountered. j(ump) lineno ¶ Set the next line that will be executed. Only available in the bottom-most frame. This lets you jump back and execute code again, or jump forward to skip code that you don’t want to run. It should be noted that not all jumps are allowed – for instance it is not possible to jump into the middle of a for loop or out of a finally 子句。 l(ist) [first[, last]] ¶ List source code for the current file. Without arguments, list 11 lines around the current line or continue the previous listing. With . as argument, list 11 lines around the current line. With one argument, list 11 lines around at that line. With two arguments, list the given range; if the second argument is less than the first, it is interpreted as a count. The current line in the current frame is indicated by -> . If an exception is being debugged, the line where the exception was originally raised or propagated is indicated by >> , if it differs from the current line. 3.2 版改变： 添加 >> 标记。 ll | longlist ¶ List all source code for the current function or frame. Interesting lines are marked as for list . Added in version 3.2. a(rgs) ¶ Print the arguments of the current function and their current values. p 表达式 ¶ Evaluate 表达式 in the current context and print its value. 注意 print() can also be used, but is not a debugger command — this executes the Python print() 函数。 pp 表达式 ¶ 像 p command, except the value of 表达式 is pretty-printed using the pprint 模块。 whatis 表达式 ¶ Print the type of 表达式 . source 表达式 ¶ Try to get source code of 表达式 and display it. Added in version 3.2. display [expression] ¶ Display the value of 表达式 if it changed, each time execution stops in the current frame. Without 表达式 , list all display expressions for the current frame. 注意 Display evaluates 表达式 and compares to the result of the previous evaluation of 表达式 , so when the result is mutable, display may not be able to pick up the changes. 范例： lst = [] breakpoint() pass lst.append(1) print(lst) Display won’t realize lst has been changed because the result of evaluation is modified in place by lst.append(1) before being compared: > example.py(3)<module>() -> pass (Pdb) display lst display lst: [] (Pdb) n > example.py(4)<module>() -> lst.append(1) (Pdb) n > example.py(5)<module>() -> print(lst) (Pdb) You can do some tricks with copy mechanism to make it work: > example.py(3)<module>() -> pass (Pdb) display lst[:] display lst[:]: [] (Pdb) n > example.py(4)<module>() -> lst.append(1) (Pdb) n > example.py(5)<module>() -> print(lst) display lst[:]: [1] [old: []] (Pdb) Added in version 3.2. undisplay [expression] ¶ Do not display 表达式 anymore in the current frame. Without 表达式 , clear all display expressions for the current frame. Added in version 3.2. interact ¶ 启动交互解释器 (使用 code module) whose global namespace contains all the (global and local) names found in the current scope. Added in version 3.2. alias [name [command]] ¶ 创建别名称为 name 执行 命令 。 命令 must not be enclosed in quotes. Replaceable parameters can be indicated by %1 , %2 , and so on, while %* is replaced by all the parameters. If 命令 is omitted, the current alias for name is shown. If no arguments are given, all aliases are listed. Aliases may be nested and can contain anything that can be legally typed at the pdb prompt. Note that internal pdb commands can be overridden by aliases. Such a command is then hidden until the alias is removed. Aliasing is recursively applied to the first word of the command line; all other words in the line are left alone. As an example, here are two useful aliases (especially when placed in the .pdbrc file): # Print instance variables (usage "pi classInst") alias pi for k in %1.__dict__.keys(): print(f"%1.{k} = {%1.__dict__[k]}") # Print instance variables in self alias ps pi self unalias name ¶ Delete the specified alias name . ! 语句 ¶ 执行 (1 行) 语句 in the context of the current stack frame. The exclamation point can be omitted unless the first word of the statement resembles a debugger command, e.g.: (Pdb) ! n=42 (Pdb) To set a global variable, you can prefix the assignment command with a global statement on the same line, e.g.: (Pdb) global list_options; list_options = ['-l'] (Pdb) run [args ...] ¶ restart [args ...] ¶ Restart the debugged Python program. If args is supplied, it is split with shlex and the result is used as the new sys.argv . History, breakpoints, actions and debugger options are preserved. restart 是别名化的 run . q(uit) ¶ 从调试器离开。中止正执行程序。 debug code ¶ Enter a recursive debugger that steps through code (which is an arbitrary expression or statement to be executed in the current environment). retval ¶ Print the return value for the last return of the current function. 脚注 内容表 pdb — Python 调试器 调试器命令 上一话题 faulthandler — 转储 Python 回溯 下一话题 Python 剖分析器 本页 报告 Bug 展示源 快速搜索 键入搜索术语或模块、类、函数名称。 首页 Python 3.12.4 索引 模块 下一 上一 Python 标准库 调试和剖分析 pdb — Python 调试器
源代码： Lib/pdb.py
模块 pdb 为 Python 程序定义交互源代码调试器。它支持在源代码行级别设置 (条件) 断点和单步执行、审查堆栈帧、列出源代码、及在任何堆栈帧上下文中评估任意 Python 代码。它支持事后调试，且还可以在程序控制下被调用。
调试器可扩展 – 实际上，它被定义成类 Pdb 。这目前未文档化，但通过阅读源代码很容易理解。扩展接口使用模块 bdb and cmd .
Pdb
bdb
cmd
另请参阅
faulthandler
Used to dump Python tracebacks explicitly, on a fault, after a timeout, or on a user signal.
traceback
Standard interface to extract, format and print stack traces of Python programs.
The typical usage to break into the debugger is to insert:
import pdb; pdb.set_trace()
或：
breakpoint()
at the location you want to break into the debugger, and then run the program. You can then step through the code following this statement, and continue running without the debugger using the continue 命令。
continue
3.7 版改变： 内置 breakpoint() , when called with defaults, can be used instead of import pdb; pdb.set_trace() .
def double(x): breakpoint() return x * 2 val = 3 print(f"{val} * 2 is {double(val)}")
调试器提示为 (Pdb) , which is the indicator that you are in debug mode:
(Pdb)
> ...(3)double() -> return x * 2 (Pdb) p x 3 (Pdb) continue 3 * 2 is 6
3.3 版改变： Tab 补全凭借 readline 模块可用于命令和命令自变量，如：提供当前全局和局部名称作为自变量为 p 命令。
readline
p
You can also invoke pdb from the command line to debug other scripts. For example:
python -m pdb myscript.py
When invoked as a module, pdb will automatically enter post-mortem debugging if the program being debugged exits abnormally. After post-mortem debugging (or after normal exit of the program), pdb will restart the program. Automatic restarting preserves pdb’s state (such as breakpoints) and in most cases is more useful than quitting the debugger upon program’s exit.
3.2 版改变： 添加 -c option to execute commands as if given in a .pdbrc 文件；见 调试器命令 .
-c
.pdbrc
3.7 版改变： 添加 -m option to execute modules similar to the way python -m does. As with a script, the debugger will pause execution just before the first line of the module.
-m
python -m
Typical usage to execute a statement under control of the debugger is:
>>> import pdb >>> def f(x): ... print(1 / x) >>> pdb.run("f(2)") > <string>(1)<module>() (Pdb) continue 0.5 >>>
审查崩溃程序的典型用法：
>>> import pdb >>> def f(x): ... print(1 / x) ... >>> f(0) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "<stdin>", line 2, in f ZeroDivisionError: division by zero >>> pdb.pm() > <stdin>(2)f() (Pdb) p x 0 (Pdb)
The module defines the following functions; each enters the debugger in a slightly different way:
执行 语句 (given as a string or a code object) under debugger control. The debugger prompt appears before any code is executed; you can set breakpoints and type continue , or you can step through the statement using step or next (all these commands are explained below). The optional globals and locals arguments specify the environment in which the code is executed; by default the dictionary of the module __main__ is used. (See the explanation of the built-in exec() or eval() functions.)
step
next
__main__
exec()
eval()
评估 表达式 (given as a string or a code object) under debugger control. When runeval() returns, it returns the value of the 表达式 . Otherwise this function is similar to run() .
runeval()
run()
调用 function (a function or method object, not a string) with the given arguments. When runcall() returns, it returns whatever the function call returned. The debugger prompt appears as soon as the function is entered.
runcall()
Enter the debugger at the calling stack frame. This is useful to hard-code a breakpoint at a given point in a program, even if the code is not otherwise being debugged (e.g. when an assertion fails). If given, header is printed to the console just before debugging begins.
3.7 版改变： 仅关键词自变量 header .
Enter post-mortem debugging of the given traceback 对象。若无 traceback is given, it uses the one of the exception that is currently being handled (an exception must be being handled if the default is to be used).
Enter post-mortem debugging of the traceback found in sys.last_traceback .
sys.last_traceback
The run* 函数和 set_trace() 是别名对于实例化的 Pdb 类且调用同名方法。若想要访问进一步特征，自己必须这样做：
run*
set_trace()
Pdb 是调试器类。
The completekey , stdin and stdout 自变量会被传递给底层 cmd.Cmd 类；见这里的描述。
cmd.Cmd
The skip argument, if given, must be an iterable of glob-style module name patterns. The debugger will not step into frames that originate in a module that matches one of these patterns. [ 1 ]
By default, Pdb sets a handler for the SIGINT signal (which is sent when the user presses Ctrl - C on the console) when you give a continue command. This allows you to break into the debugger again by pressing Ctrl - C . If you want Pdb not to touch the SIGINT handler, set nosigint to true.
The readrc argument defaults to true and controls whether Pdb will load .pdbrc files from the filesystem.
范例调用启用跟踪采用 skip :
import pdb; pdb.Pdb(skip=['django.*']).set_trace()
引发 审计事件 pdb.Pdb 不带自变量。
pdb.Pdb
3.1 版改变： 添加 skip 参数。
3.2 版改变： 添加 nosigint parameter. Previously, a SIGINT handler was never set by Pdb.
3.6 版改变： The readrc 自变量。
See the documentation for the functions explained above.
The commands recognized by the debugger are listed below. Most commands can be abbreviated to one or two letters as indicated; e.g. h(elp) means that either h or help can be used to enter the help command (but not he or hel , nor H or Help or HELP ). Arguments to commands must be separated by whitespace (spaces or tabs). Optional arguments are enclosed in square brackets ( [] ) in the command syntax; the square brackets must not be typed. Alternatives in the command syntax are separated by a vertical bar ( | ).
h(elp)
h
help
he
hel
H
Help
HELP
[]
|
Entering a blank line repeats the last command entered. Exception: if the last command was a list command, the next 11 lines are listed.
list
Commands that the debugger doesn’t recognize are assumed to be Python statements and are executed in the context of the program being debugged. Python statements can also be prefixed with an exclamation point ( ! ). This is a powerful way to inspect the program being debugged; it is even possible to change a variable or call a function. When an exception occurs in such a statement, the exception name is printed but the debugger’s state is not changed.
!
调试器支持 aliases . Aliases can have parameters which allows one a certain level of adaptability to the context under examination.
Multiple commands may be entered on a single line, separated by ;; 。(单 ; is not used as it is the separator for multiple commands in a line that is passed to the Python parser.) No intelligence is applied to separating the commands; the input is split at the first ;; pair, even if it is in the middle of a quoted string. A workaround for strings with double semicolons is to use implicit string concatenation ';'';' or ";"";" .
;;
;
';'';'
";"";"
To set a temporary global variable, use a convenience variable 。 convenience variable is a variable whose name starts with $ 。例如， $foo = 1 sets a global variable $foo which you can use in the debugger session. The convenience variables are cleared when the program resumes execution so it’s less likely to interfere with your program compared to using normal variables like foo = 1 .
$
$foo = 1
$foo
foo = 1
There are three preset convenience variables :
$_frame : the current frame you are debugging
$_frame
$_retval : the return value if the frame is returning
$_retval
$_exception : the exception if the frame is raising an exception
$_exception
Added in version 3.12: 添加 convenience variable 特征。
若文件 .pdbrc exists in the user’s home directory or in the current directory, it is read with 'utf-8' encoding and executed as if it had been typed at the debugger prompt, with the exception that empty lines and lines starting with # are ignored. This is particularly useful for aliases. If both files exist, the one in the home directory is read first and aliases defined there can be overridden by the local file.
'utf-8'
#
3.2 版改变： .pdbrc 现在可以包含继续调试命令，譬如 continue or next . Previously, these commands had no effect.
3.11 版改变： .pdbrc 现在读取是采用 'utf-8' encoding. Previously, it was read with the system locale encoding.
Without argument, print the list of available commands. With a 命令 as argument, print help about that command. help pdb displays the full documentation (the docstring of the pdb module). Since the 命令 argument must be an identifier, help exec must be entered to get help on the ! 命令。
help pdb
help exec
Print a stack trace, with the most recent frame at the bottom. An arrow ( > ) indicates the current frame, which determines the context of most commands.
>
移动当前帧 count (default one) levels down in the stack trace (to a newer frame).
移动当前帧 count (default one) levels up in the stack trace (to an older frame).
With a lineno argument, set a break there in the current file. With a function argument, set a break at the first executable statement within that function. The line number may be prefixed with a filename and a colon, to specify a breakpoint in another file (probably one that hasn’t been loaded yet). The file is searched on sys.path . Note that each breakpoint is assigned a number to which all the other breakpoint commands refer.
sys.path
If a second argument is present, it is an expression which must evaluate to true before the breakpoint is honored.
Without argument, list all breaks, including for each breakpoint, the number of times that breakpoint has been hit, the current ignore count, and the associated condition if any.
Temporary breakpoint, which is removed automatically when it is first hit. The arguments are the same as for break .
break
With a filename:lineno argument, clear all the breakpoints at this line. With a space separated list of breakpoint numbers, clear those breakpoints. Without argument, clear all breaks (but first ask confirmation).
Disable the breakpoints given as a space separated list of breakpoint numbers. Disabling a breakpoint means it cannot cause the program to stop execution, but unlike clearing a breakpoint, it remains in the list of breakpoints and can be (re-)enabled.
Enable the breakpoints specified.
Set the ignore count for the given breakpoint number. If count is omitted, the ignore count is set to 0. A breakpoint becomes active when the ignore count is zero. When non-zero, the count is decremented each time the breakpoint is reached and the breakpoint is not disabled and any associated condition evaluates to true.
Set a new 条件 for the breakpoint, an expression which must evaluate to true before the breakpoint is honored. If 条件 is absent, any existing condition is removed; i.e., the breakpoint is made unconditional.
指定命令列表为断点编号 bpnumber . The commands themselves appear on the following lines. Type a line containing just end to terminate the commands. An example:
end
(Pdb) commands 1 (com) p some_variable (com) end (Pdb)
To remove all commands from a breakpoint, type commands and follow it immediately with end ; that is, give no commands.
commands
不带 bpnumber 自变量， commands 指最后断点集。
You can use breakpoint commands to start your program up again. Simply use the continue 命令，或 step , or any other command that resumes execution.
Specifying any command resuming execution (currently continue , step , next , return , jump , quit and their abbreviations) terminates the command list (as if that command was immediately followed by end). This is because any time you resume execution (even with a simple next or step), you may encounter another breakpoint—which could have its own command list, leading to ambiguities about which list to execute.
return
jump
quit
若使用 silent command in the command list, the usual message about stopping at a breakpoint is not printed. This may be desirable for breakpoints that are to print a specific message and then continue. If none of the other commands print anything, you see no sign that the breakpoint was reached.
silent
Execute the current line, stop at the first possible occasion (either in a function that is called or on the next line in the current function).
Continue execution until the next line in the current function is reached or it returns. (The difference between next and step is that step stops inside a called function, while next executes called functions at (nearly) full speed, only stopping at the next line in the current function.)
Without argument, continue execution until the line with a number greater than the current one is reached.
采用 lineno , continue execution until a line with a number greater or equal to lineno is reached. In both cases, also stop when the current frame returns.
3.2 版改变： 允许给出明确行号。
继续执行，直到当前函数返回为止。
Continue execution, only stop when a breakpoint is encountered.
Set the next line that will be executed. Only available in the bottom-most frame. This lets you jump back and execute code again, or jump forward to skip code that you don’t want to run.
It should be noted that not all jumps are allowed – for instance it is not possible to jump into the middle of a for loop or out of a finally 子句。
for
finally
List source code for the current file. Without arguments, list 11 lines around the current line or continue the previous listing. With . as argument, list 11 lines around the current line. With one argument, list 11 lines around at that line. With two arguments, list the given range; if the second argument is less than the first, it is interpreted as a count.
.
The current line in the current frame is indicated by -> . If an exception is being debugged, the line where the exception was originally raised or propagated is indicated by >> , if it differs from the current line.
->
>>
3.2 版改变： 添加 >> 标记。
List all source code for the current function or frame. Interesting lines are marked as for list .
Added in version 3.2.
Print the arguments of the current function and their current values.
Evaluate 表达式 in the current context and print its value.
注意
print() can also be used, but is not a debugger command — this executes the Python print() 函数。
print()
像 p command, except the value of 表达式 is pretty-printed using the pprint 模块。
pprint
Print the type of 表达式 .
Try to get source code of 表达式 and display it.
Display the value of 表达式 if it changed, each time execution stops in the current frame.
Without 表达式 , list all display expressions for the current frame.
Display evaluates 表达式 and compares to the result of the previous evaluation of 表达式 , so when the result is mutable, display may not be able to pick up the changes.
范例：
lst = [] breakpoint() pass lst.append(1) print(lst)
Display won’t realize lst has been changed because the result of evaluation is modified in place by lst.append(1) before being compared:
lst
lst.append(1)
> example.py(3)<module>() -> pass (Pdb) display lst display lst: [] (Pdb) n > example.py(4)<module>() -> lst.append(1) (Pdb) n > example.py(5)<module>() -> print(lst) (Pdb)
You can do some tricks with copy mechanism to make it work:
> example.py(3)<module>() -> pass (Pdb) display lst[:] display lst[:]: [] (Pdb) n > example.py(4)<module>() -> lst.append(1) (Pdb) n > example.py(5)<module>() -> print(lst) display lst[:]: [1] [old: []] (Pdb)
Do not display 表达式 anymore in the current frame. Without 表达式 , clear all display expressions for the current frame.
启动交互解释器 (使用 code module) whose global namespace contains all the (global and local) names found in the current scope.
code
创建别名称为 name 执行 命令 。 命令 must not be enclosed in quotes. Replaceable parameters can be indicated by %1 , %2 , and so on, while %* is replaced by all the parameters. If 命令 is omitted, the current alias for name is shown. If no arguments are given, all aliases are listed.
%1
%2
%*
Aliases may be nested and can contain anything that can be legally typed at the pdb prompt. Note that internal pdb commands can be overridden by aliases. Such a command is then hidden until the alias is removed. Aliasing is recursively applied to the first word of the command line; all other words in the line are left alone.
As an example, here are two useful aliases (especially when placed in the .pdbrc file):
# Print instance variables (usage "pi classInst") alias pi for k in %1.__dict__.keys(): print(f"%1.{k} = {%1.__dict__[k]}") # Print instance variables in self alias ps pi self
Delete the specified alias name .
执行 (1 行) 语句 in the context of the current stack frame. The exclamation point can be omitted unless the first word of the statement resembles a debugger command, e.g.:
(Pdb) ! n=42 (Pdb)
To set a global variable, you can prefix the assignment command with a global statement on the same line, e.g.:
global
(Pdb) global list_options; list_options = ['-l'] (Pdb)
Restart the debugged Python program. If args is supplied, it is split with shlex and the result is used as the new sys.argv . History, breakpoints, actions and debugger options are preserved. restart 是别名化的 run .
shlex
sys.argv
restart
run
从调试器离开。中止正执行程序。
Enter a recursive debugger that steps through code (which is an arbitrary expression or statement to be executed in the current environment).
Print the return value for the last return of the current function.
脚注
faulthandler — 转储 Python 回溯
Python 剖分析器
键入搜索术语或模块、类、函数名称。