zipfile — 操控 ZIP 存档 ¶

ZipFile 对象 ¶

class zipfile. ZipFile ( file , mode='r' , compression=ZIP_STORED , allowZip64=True , compresslevel=None , * , strict_timestamps=True ) ¶

Open a ZIP file, where file can be a path to a file (a string), a file-like object or a 像路径对象 .

mode parameter should be 'r' to read an existing file, 'w' to truncate and write a new file, 'a' to append to an existing file, or 'x' to exclusively create and write a new file. If mode is 'x' and file refers to an existing file, a FileExistsError will be raised. If mode is 'a' and file refers to an existing ZIP file, then additional files are added to it. If file does not refer to a ZIP file, then a new ZIP archive is appended to the file. This is meant for adding a ZIP archive to another file (such as python.exe )。若 mode is 'a' and the file does not exist at all, it is created. If mode is 'r' or 'a' , the file should be seekable.

压缩 is the ZIP compression method to use when writing the archive, and should be ZIP_STORED , ZIP_DEFLATED , ZIP_BZIP2 or ZIP_LZMA ; unrecognized values will cause NotImplementedError to be raised. If ZIP_DEFLATED , ZIP_BZIP2 or ZIP_LZMA is specified but the corresponding module ( zlib , bz2 or lzma ) is not available, RuntimeError is raised. The default is ZIP_STORED .

若 allowZip64 is True (the default) zipfile will create ZIP files that use the ZIP64 extensions when the zipfile is larger than 4 GiB. If it is false zipfile will raise an exception when the ZIP file would require ZIP64 extensions.

compresslevel parameter controls the compression level to use when writing files to the archive. When using ZIP_STORED or ZIP_LZMA it has no effect. When using ZIP_DEFLATED integers 0 through 9 are accepted (see zlib for more information). When using ZIP_BZIP2 integers 1 through 9 are accepted (see bz2 for more information).

strict_timestamps argument, when set to False , allows to zip files older than 1980-01-01 at the cost of setting the timestamp to 1980-01-01. Similar behavior occurs with files newer than 2107-12-31, the timestamp is also set to the limit.

If the file is created with mode 'w' , 'x' or 'a' and then closed without adding any files to the archive, the appropriate ZIP structures for an empty archive will be written to the file.

ZipFile is also a context manager and therefore supports the with statement. In the example, myzip 被关闭后于 with 语句的套件完成 — 即使发生异常：

with ZipFile('spam.zip', 'w') as myzip:
    myzip.write('eggs.txt')
										

3.2 版新增： Added the ability to use ZipFile as a context manager.

3.3 版改变： 添加支持 bzip2 and lzma compression.

3.4 版改变： ZIP64 extensions are enabled by default.

3.5 版改变： Added support for writing to unseekable streams. Added support for the 'x' 模式。

3.6 版改变： 先前，纯 RuntimeError was raised for unrecognized compression values.

Changed in version 3.6.2: file parameter accepts a 像路径对象 .

3.7 版改变： Add the compresslevel 参数。

3.8 版新增： strict_timestamps keyword-only argument

ZipFile. close ( ) ¶

Close the archive file. You must call close() before exiting your program or essential records will not be written.

ZipFile. getinfo ( name ) ¶

返回 ZipInfo object with information about the archive member name . Calling getinfo() for a name not currently contained in the archive will raise a KeyError .

ZipFile. infolist ( ) ¶

Return a list containing a ZipInfo object for each member of the archive. The objects are in the same order as their entries in the actual ZIP file on disk if an existing archive was opened.

ZipFile. namelist ( ) ¶

Return a list of archive members by name.

ZipFile. open ( name , mode='r' , pwd=None , * , force_zip64=False ) ¶

Access a member of the archive as a binary file-like object. name can be either the name of a file within the archive or a ZipInfo object. The mode parameter, if included, must be 'r' (默认) 或 'w' . pwd is the password used to decrypt encrypted ZIP files.

open() 也是上下文管理器，因此支持 with 语句：

with ZipFile('spam.zip') as myzip:
    with myzip.open('eggs.txt') as myfile:
        print(myfile.read())
										

With mode 'r' the file-like object ( ZipExtFile ) is read-only and provides the following methods: read() , readline() , readlines() , seek() , tell() , __iter__() , __next__() . These objects can operate independently of the ZipFile.

With mode='w' , a writable file handle is returned, which supports the write() method. While a writable file handle is open, attempting to read or write other files in the ZIP file will raise a ValueError .

When writing a file, if the file size is not known in advance but may exceed 2 GiB, pass force_zip64=True to ensure that the header format is capable of supporting large files. If the file size is known in advance, construct a ZipInfo object with file_size set, and use that as the name 参数。

注意

open() , read() and extract() methods can take a filename or a ZipInfo object. You will appreciate this when trying to read a ZIP file that contains members with duplicate names.

3.6 版改变： Removed support of mode='U' 。使用 io.TextIOWrapper for reading compressed text files in 通用换行符 模式。

3.6 版改变： open() can now be used to write files into the archive with the mode='w' 选项。

3.6 版改变： 调用 open() on a closed ZipFile will raise a ValueError . Previously, a RuntimeError 被引发。

ZipFile. extract ( member , path=None , pwd=None ) ¶

Extract a member from the archive to the current working directory; member must be its full name or a ZipInfo object. Its file information is extracted as accurately as possible. path specifies a different directory to extract to. member can be a filename or a ZipInfo 对象。 pwd is the password used for encrypted files.

Returns the normalized path created (a directory or new file).

注意

If a member filename is an absolute path, a drive/UNC sharepoint and leading (back)slashes will be stripped, e.g.: ///foo/bar becomes foo/bar on Unix, and C:\foo\bar becomes foo\bar on Windows. And all ".." components in a member filename will be removed, e.g.: ../../foo../../ba..r becomes foo../ba..r . On Windows illegal characters ( : , < , > , | , " , ? ，和 * ) replaced by underscore ( _ ).

3.6 版改变： 调用 extract() on a closed ZipFile will raise a ValueError . Previously, a RuntimeError 被引发。

Changed in version 3.6.2: path parameter accepts a 像路径对象 .

ZipFile. extractall ( path=None , members=None , pwd=None ) ¶

Extract all members from the archive to the current working directory. path specifies a different directory to extract to. members is optional and must be a subset of the list returned by namelist() . pwd is the password used for encrypted files.

警告

Never extract archives from untrusted sources without prior inspection. It is possible that files are created outside of path , e.g. members that have absolute filenames starting with "/" or filenames with two dots ".." . This module attempts to prevent that. See extract() note.

3.6 版改变： 调用 extractall() on a closed ZipFile will raise a ValueError . Previously, a RuntimeError 被引发。

Changed in version 3.6.2: path parameter accepts a 像路径对象 .

ZipFile. printdir ( ) ¶

Print a table of contents for the archive to sys.stdout .

ZipFile. setpassword ( pwd ) ¶

Set pwd as default password to extract encrypted files.

ZipFile. read ( name , pwd=None ) ¶

Return the bytes of the file name in the archive. name is the name of the file in the archive, or a ZipInfo object. The archive must be open for read or append. pwd is the password used for encrypted files and, if specified, it will override the default password set with setpassword() . Calling read() on a ZipFile that uses a compression method other than ZIP_STORED , ZIP_DEFLATED , ZIP_BZIP2 or ZIP_LZMA will raise a NotImplementedError . An error will also be raised if the corresponding compression module is not available.

3.6 版改变： 调用 read() on a closed ZipFile will raise a ValueError . Previously, a RuntimeError 被引发。

ZipFile. testzip ( ) ¶

Read all the files in the archive and check their CRC’s and file headers. Return the name of the first bad file, or else return None .

3.6 版改变： 调用 testzip() on a closed ZipFile will raise a ValueError . Previously, a RuntimeError 被引发。

ZipFile. write ( filename , arcname=None , compress_type=None , compresslevel=None ) ¶

Write the file named filename to the archive, giving it the archive name arcname (by default, this will be the same as filename , but without a drive letter and with leading path separators removed). If given, compress_type overrides the value given for the 压缩 parameter to the constructor for the new entry. Similarly, compresslevel will override the constructor if given. The archive must be open with mode 'w' , 'x' or 'a' .

注意

Archive names should be relative to the archive root, that is, they should not start with a path separator.

注意

若 arcname (或 filename , if arcname is not given) contains a null byte, the name of the file in the archive will be truncated at the null byte.

注意

A leading slash in the filename may lead to the archive being impossible to open in some zip programs on Windows systems.

3.6 版改变： 调用 write() on a ZipFile created with mode 'r' or a closed ZipFile will raise a ValueError . Previously, a RuntimeError 被引发。

ZipFile. writestr ( zinfo_or_arcname , data , compress_type=None , compresslevel=None ) ¶

Write a file into the archive. The contents is data , which may be either a str 或 bytes instance; if it is a str , it is encoded as UTF-8 first. zinfo_or_arcname is either the file name it will be given in the archive, or a ZipInfo instance. If it’s an instance, at least the filename, date, and time must be given. If it’s a name, the date and time is set to the current date and time. The archive must be opened with mode 'w' , 'x' or 'a' .

若给定， compress_type overrides the value given for the 压缩 parameter to the constructor for the new entry, or in the zinfo_or_arcname (if that is a ZipInfo instance). Similarly, compresslevel will override the constructor if given.

注意

当传递 ZipInfo instance as the zinfo_or_arcname parameter, the compression method used will be that specified in the compress_type member of the given ZipInfo instance. By default, the ZipInfo constructor sets this member to ZIP_STORED .

3.2 版改变： compress_type 自变量。

3.6 版改变： 调用 writestr() on a ZipFile created with mode 'r' or a closed ZipFile will raise a ValueError . Previously, a RuntimeError 被引发。

The following data attributes are also available:

ZipFile. filename ¶

Name of the ZIP file.

ZipFile. debug ¶

The level of debug output to use. This may be set from 0 (the default, no output) to 3 (the most output). Debugging information is written to sys.stdout .

ZipFile. comment ¶

The comment associated with the ZIP file as a bytes object. If assigning a comment to a ZipFile instance created with mode 'w' , 'x' or 'a' , it should be no longer than 65535 bytes. Comments longer than this will be truncated.

Path 对象 ¶

class zipfile. Path ( root , at='' ) ¶

Construct a Path object from a root zipfile (which may be a ZipFile instance or file suitable for passing to the ZipFile constructor).

at specifies the location of this Path within the zipfile, e.g. ‘dir/file.txt’, ‘dir/’, or ‘’. Defaults to the empty string, indicating the root.

Path objects expose the following features of pathlib.Path 对象：

Path objects are traversable using the / operator.

Path. name ¶

The final path component.

Path. open ( mode='r' , * , pwd , ** ) ¶

Invoke ZipFile.open() on the current path. Allows opening for read or write, text or binary through supported modes: ‘r’, ‘w’, ‘rb’, ‘wb’. Positional and keyword arguments are passed through to io.TextIOWrapper when opened as text and ignored otherwise. pwd 是 pwd 参数到 ZipFile.open() .

3.9 版改变： Added support for text and binary modes for open. Default mode is now text.

Path. iterdir ( ) ¶

Enumerate the children of the current directory.

Path. is_dir ( ) ¶

返回 True if the current context references a directory.

Path. is_file ( ) ¶

返回 True if the current context references a file.

Path. exists ( ) ¶

返回 True if the current context references a file or directory in the zip file.

Path. read_text ( * , ** ) ¶

Read the current file as unicode text. Positional and keyword arguments are passed through to io.TextIOWrapper (except buffer , which is implied by the context).

Path. read_bytes ( ) ¶

Read the current file as bytes.

PyZipFile 对象 ¶

PyZipFile constructor takes the same parameters as the ZipFile constructor, and one additional parameter, optimize .

class zipfile. PyZipFile ( file , mode='r' , compression=ZIP_STORED , allowZip64=True , optimize=-1 ) ¶

3.2 版新增： optimize 参数。

3.4 版改变： ZIP64 extensions are enabled by default.

Instances have one method in addition to those of ZipFile 对象：

writepy ( pathname , basename='' , filterfunc=None ) ¶

Search for files *.py and add the corresponding file to the archive.

若 optimize 参数到 PyZipFile was not given or -1 , the corresponding file is a *.pyc file, compiling if necessary.

若 optimize 参数到 PyZipFile was 0 , 1 or 2 , only files with that optimization level (see compile() ) are added to the archive, compiling if necessary.

若 pathname is a file, the filename must end with .py , and just the (corresponding *.pyc ) file is added at the top level (no path information). If pathname is a file that does not end with .py ， RuntimeError will be raised. If it is a directory, and the directory is not a package directory, then all the files *.pyc are added at the top level. If the directory is a package directory, then all *.pyc are added under the package name as a file path, and if any subdirectories are package directories, all of these are added recursively in sorted order.

basename is intended for internal use only.

filterfunc , if given, must be a function taking a single string argument. It will be passed each path (including each individual full file path) before it is added to the archive. If filterfunc returns a false value, the path will not be added, and if it is a directory its contents will be ignored. For example, if our test files are all either in test directories or start with the string test_ , we can use a filterfunc to exclude them:

>>> zf = PyZipFile('myprog.zip')
>>> def notests(s):
...     fn = os.path.basename(s)
...     return (not (fn == 'test' or fn.startswith('test_')))
>>> zf.writepy('myprog', filterfunc=notests)
												

writepy() method makes archives with file names like this:

string.pyc                   # Top level name
test/__init__.pyc            # Package directory
test/testall.pyc             # Module test.testall
test/bogus/__init__.pyc      # Subpackage directory
test/bogus/myfile.pyc        # Submodule test.bogus.myfile
												

3.4 版新增： filterfunc 参数。

Changed in version 3.6.2: pathname parameter accepts a 像路径对象 .

3.7 版改变： Recursion sorts directory entries.

ZipInfo 对象 ¶

实例化的 ZipInfo class are returned by the getinfo() and infolist() methods of ZipFile objects. Each object stores information about a single member of the ZIP archive.

There is one classmethod to make a ZipInfo instance for a filesystem file:

classmethod ZipInfo. from_file ( filename , arcname=None , * , strict_timestamps=True ) ¶

构造 ZipInfo instance for a file on the filesystem, in preparation for adding it to a zip file.

filename should be the path to a file or directory on the filesystem.

若 arcname is specified, it is used as the name within the archive. If arcname is not specified, the name will be the same as filename , but with any drive letter and leading path separators removed.

strict_timestamps argument, when set to False , allows to zip files older than 1980-01-01 at the cost of setting the timestamp to 1980-01-01. Similar behavior occurs with files newer than 2107-12-31, the timestamp is also set to the limit.

3.6 版新增。

Changed in version 3.6.2: filename parameter accepts a 像路径对象 .

3.8 版新增： strict_timestamps keyword-only argument

Instances have the following methods and attributes:

ZipInfo. is_dir ( ) ¶

返回 True if this archive member is a directory.

This uses the entry’s name: directories should always end with / .

3.6 版新增。

ZipInfo. filename ¶

Name of the file in the archive.

ZipInfo. date_time ¶

The time and date of the last modification to the archive member. This is a tuple of six values:

索引	值
0	Year (>= 1980)
1	Month (one-based)
2	Day of month (one-based)
3	Hours (zero-based)
4	Minutes (zero-based)
5	Seconds (zero-based)

注意

The ZIP file format does not support timestamps before 1980.

ZipInfo. compress_type ¶

Type of compression for the archive member.

ZipInfo. comment ¶

Comment for the individual archive member as a bytes 对象。

ZipInfo. extra ¶

Expansion field data. The PKZIP Application Note contains some comments on the internal structure of the data contained in this bytes 对象。

ZipInfo. create_system ¶

System which created ZIP archive.

ZipInfo. create_version ¶

PKZIP version which created ZIP archive.

ZipInfo. extract_version ¶

PKZIP version needed to extract archive.

ZipInfo. reserved ¶

Must be zero.

ZipInfo. flag_bits ¶

ZIP flag bits.

ZipInfo. volume ¶

Volume number of file header.

ZipInfo. internal_attr ¶

Internal attributes.

ZipInfo. external_attr ¶

External file attributes.

ZipInfo. header_offset ¶

Byte offset to the file header.

ZipInfo. CRC ¶

CRC-32 of the uncompressed file.

ZipInfo. compress_size ¶

Size of the compressed data.

ZipInfo. file_size ¶

Size of the uncompressed file.

命令行接口 ¶

zipfile module provides a simple command-line interface to interact with ZIP archives.

If you want to create a new ZIP archive, specify its name after the -c option and then list the filename(s) that should be included:

$ python -m zipfile -c monty.zip spam.txt eggs.txt
								

Passing a directory is also acceptable:

$ python -m zipfile -c monty.zip life-of-brian_1979/
								

If you want to extract a ZIP archive into the specified directory, use the -e 选项：

$ python -m zipfile -e monty.zip target-dir/
								

For a list of the files in a ZIP archive, use the -l 选项：

$ python -m zipfile -l monty.zip
								

解压缩陷阱 ¶

The extraction in zipfile module might fail due to some pitfalls listed below.